Passer au contenu
Help center
Coming Soon

Toyota Tacoma/4Runner Mirror Overlay Gloss Black With Turn Signal Cut-out - M-GT301

$157.99
$157.99

Shipping calculated at checkout.


Checking fitment…
Arrives as early as (Delivery date available after selecting a quality.)
(Recommended)

Vous ne savez pas vraiment ce que signifie la qualité ?

Ce n'est pas grave. Nous sommes là pour vous aider.

Les pièces de rechange offrent une alternative économique pour les réparations de véhicules, offrant un ajustement et une fonctionnalité fiables à un prix plus abordable.

If you’re looking for a reliable replacement that gets the job done without overspending, this is your go-to.
  1. Solution abordable :Une option économique qui vous aide à économiser sans compromettre la qualité essentielle.
  2. Ajustement fiable :Conçu pour s'aligner étroitement sur les normes OEM, garantissant un ajustement fiable et fonctionnel pour votre véhicule.
  3. Performance quotidienne :Conçu pour prendre en charge les réparations standard et maintenir un fonctionnement fiable du véhicule.
  4. Valeur exceptionnelle :Combine des économies de coûts avec des performances solides, offrant un choix intelligent pour la plupart des besoins de réparation.
Best for: Budget-minded customers who want quality and reliability.

Les pièces certifiées CAPA respectent ou dépassent les normes OEM, garantissant des remplacements fiables et de haute qualité à un prix plus abordable.

CAPA parts are independently certified to meet or exceed OEM standards, giving you top performance and a perfect fit at a lower cost.
  1. Assurance qualité:Les pièces CAPA sont rigoureusement testées pour répondre ou dépasser les normes de performance OEM.
  2. Ajustement exact :Conçu pour s'adapter parfaitement à votre modèle de véhicule, tout comme les pièces OEM.
  3. Rentable :Des remplacements abordables sans compromis sur la qualité ou la sécurité.
  4. Sécurité certifiée :Les pièces CAPA sont soumises à des tests de sécurité et de durabilité pour répondre aux normes de l'industrie.
Best for: Drivers who want OEM quality and long-term peace of mind, for less.

Les pièces OEM sont fabriquées par le même fabricant que votre véhicule, garantissant un ajustement parfait.

OEM parts offer factory-perfect fit and finish, made to the same exact standards as your car’s original parts.
  1. Ajustement exact :Fabriqué spécifiquement pour votre modèle, garantissant une installation et des performances transparentes.
  2. Matériaux de qualité supérieure :Fabriqué avec des matériaux de haute qualité pour plus de durabilité et de longévité.
  3. Sécurité:Conforme aux normes de sécurité d'origine pour une tranquillité d'esprit.
Best for: Drivers who want the absolute best match and factory-fresh performance.
$157.99
$157.99

Taxes et frais de port calculés à l'étape de paiement

Guide d’installation

Mirror Cap Overlay Installation Guide

Ouvrir le guide d’installation complet

Mirror cap overlay being placed over a Toyota Tacoma side mirror

Mirror cap overlays fit over your factory mirror caps. They do not replace the mirror or the cap. Each overlay is held on with pre-applied 3M automotive acrylic foam tape and is made to fit your truck without any modification to the mirror.

Before you peel anything: do a dry fit. Once the red backing is off the tape, the part is considered used.

What you will need

  • In the box: left and right mirror overlays with tape pre-applied and an alcohol prep wipe. Some sets also include strips of blackout tape.
  • Isopropyl rubbing alcohol and a clean, lint-free white cloth. A 3M prep solvent also works if you have it.
  • A hair dryer if the mirror is cold. The surface should be 68 to 100 F (20 to 38 C), and never below 60 F (15 C).

Prepare the mirror cap

  • Make sure the factory mirror cap is clean, dry and free of debris. Remove oil and grease with a cleaner first, then wipe the areas where the tape will stick with isopropyl alcohol and a clean cloth. Do not use shop rags.

Install

  1. Dry fit. Go through the installation steps below without removing the red backing, to check the fit and get a feel for the movement.
  2. Clean the areas where the tape will stick once more with the included alcohol wipe (or a 3M prep solvent).
  3. If blackout tape is included, apply it along the lower edge of the factory mirror cap so no chrome can show through at that edge.
  4. Peel the red backing off the double-sided tape on the back of the overlay.
  5. Gently pull the edges of the overlay outward to widen its opening, so the tape is less likely to touch down early.
  6. Hold the overlay with the top edge tilted toward you, so that only the bottom edge meets the factory mirror cap.
  7. Slowly tip the top edge back toward the mirror, keeping the bottom edge covering all of the original cap.
  8. Check around the edges to make sure no chrome shows. Shift the overlay if needed. Once you are happy with the fit, press firmly on all taped areas.
  9. Repeat on the other mirror.

After installation

  • Press all taped areas again after a few hours or the next day.
  • Wait at least 24 hours before washing the truck.
  • The tape reaches full strength after 3 to 5 days at temperatures above 70 F, and longer in the cold. Once bonded, the overlay is very hard to remove without damaging it.

Care

  • Treat the overlay like a fine paint finish and use good quality car care products.
  • Gloss: light scratches can often be buffed out.
  • Matte: abrasion leaves a permanent glossy sheen. Do not buff it, and use a brushless car wash.

Need help? Email info@partify.ca or call 888-719-8297, and tell us your vehicle and the part number from your order.

 Ships from London, Ontario

Product details

Reference

Fitment Data

MakeModelYearNotes
TOYOTATACOMA2024-2026
TOYOTA4RUNNER2024-2026

See Partify in Action

Paint Process
Unboxing
Installation
Testimonial
Testimonial
Unboxing
Testimonial
>